 | BERGEN LAND ROVER TIMING KIT (DIESEL) Ref: AA167
This is a specialised set of tools that is required for the correct engine timing to be maintained. This updated timing set is for use when replacing the timing belts on 200Tdi, 300Tdi, 2.5D (12J), 2.5TD (19J) diesel engine models
Features:
Crankshaft Damper Puller
Injection Pump Gear Locking Tool
Injection Pump Timing Pin - 200/300
Flywheel Timing Tool - 200/300
DPS Pump Timing Tool - 2.5
Flywheel Timing Tool -2.5
EDC Timing Pin -300 (manual gearbox)
Comes in a heavy duty plastic moulded storage case
Price: £39.96 (£46.95 Including: VAT at 17.5%)
|
|
|
 | Us Pro Automotive Cable Tracker Ref: AA533
The instrument is desidend to identify and trace wires or cables within a group without damaging the insulation. You can also use it in checking for short circuits and locating open circuits etc. There is a sender and receiver included in the instrument.
Judge continuity of cables or wires
Track the cables or wires, and diagnose the break point
Comes with instruction and a very handy storage case
Price: £21.23 (£24.95 Including: VAT at 17.5%)
|
|
|
| | Us Pro Tools Noid Light Test Set Ref: AA517
This is for checking electrical system to injectors and the electronic control module for the idle air-control (IAC) motor on GM vehicles.
Features:
Check fuel injector signal faults fast and easily.
Disconnect electrical harness from injector. Plug noid light into harness. Turn engine on.
Technical Specifications
Compatible with: Ford TBI, GEO TBI, Bosch PFI, GM TBI, GM PFI, GM SCPI. GM multec 2, gm-1987, gm-1982 vehicles
Comes in a quality red blow moulded case
Price: £12.34 (£14.50 Including: VAT at 17.5%)
|
|
|
 | US PRO TOOLS 14pc OIL FILTER SET Ref: AA157
Features:
-Cup Sizes (click on More for list of sizes)
-Adapter - 1/2" dr.(f) x 3/8"(m)
-Coated with electro- black oxide finish for rust protection.
-Withstand up to 85 ft. lbs. of torque
-List of which filters to use with models
-Comes in a very handy durable storage case
Price: £23.50 (£27.61 Including: VAT at 17.5%)
|
|
|
 | BERGEN 11 pc DRAIN PLUG SET Ref: AA136
Features:
-Sizes - 8, 9, 10, 12, 14, 17mm HEXs, 3/8" Hex
-8, 11, 13mm Squares, 3/8" square
-1 - Carbon Steel Tommy Bar
-List on back stating which plugs fit which manufacturer
-Comes with a very handy storage case
Price: £14.00 (£16.45 Including: VAT at 17.5%)
|
|
|
 | BERGEN OIL FILTER STRAP Ref: AA156
-It has minimal risk of damaging the filters. This is the ideal tool if the filter needs to be refitted
Price: £7.23 (£8.50 Including: VAT at 17.5%)
|
|
|
 | BERGEN OIL FILTER STRAP (LARGE) Ref: AA384
-It has minimal risk of damaging the filters.
-This is the ideal tool if the filter needs to be refitted and is for heavy commercial vehicles
Price: £9.50 (£11.16 Including: VAT at 17.5%)
|
|
|
 | BERGEN OIL FILTER CLAW WRENCH Ref: AA155
The claws grip the filter tighter as more torque is applied to the wrench.
Price: £8.47 (£9.95 Including: VAT at 17.5%)
|
|
|
 | PNEUMATIC / AIR OIL, FLUID EXTRACTOR Ref: AA317
FEATURES
This is a 5ltr Capacity device constructed from composite materials
It uses compressed air supply to generate vacuum
It's suitable for the extraction of all types of engine transmission and lubricating oils
from cars motorcycles marine engines stationary engines and industrial machinery
Suitable also for low viscosity fluids such as water.
Comes with Ø7 and Ø10mm suction probes and a 1100mm brake/clutch bleeding hose
Uses probes to drain engine oil through the dipstick tube
Price: £51.06 (£60.00 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN 17 LITRE DRAIN PAN - SILVER Ref: FRC118
Features:
-Suitable for use with warm engine oil (up to 85 degrees celcius) or engine coolant,
-450mm diameter HDPE
-Large handles
-Enclosed spout
-Anti splash lip for easier handling of fluids.
-Suitable for garage, workshop and domestic use
Price: £16.65 (£19.56 Including: VAT at 17.5%)
|
|
|
 | BERGEN TORQUE ANGLE GUAGE Ref: AA147
Price: £5.00 (£5.88 Including: VAT at 17.5%)
|
|
|
 | BERGEN 8pc TIMING LOCKING TOOL KIT Ref: AA164
Price: £38.26 (£44.96 Including: VAT at 17.5%)
|
OUT OF STOCK |
|
 | BERGEN 22mm INJECTOR SOCKET Ref: AA170
Features:
This 22mm injector socket that is 78mm long.
Price: £4.00 (£4.70 Including: VAT at 17.5%)
|
|
|
 | BERGEN CLlC-R-COLLAR PLIERS Ref: AA386
This is designed for releasing and re-fitting CLIC and CLIC-R type re-usable hose clips
Price: £9.79 (£11.50 Including: VAT at 17.5%)
|
|
